Service Advancetrac is a Ford Electronic Stability Control (ESC). It’s a computerized and sensor-based system that connects the wheels, braking system, and other sensors. These sensors help to control the vehicle in different ways.
When the sensors get something wrong with any wheel or sensor, it’ll notify you through the Advancetrac light.
In addition, this system is solely responsible for turning on the Advancetrac light for any imbalance or anything wrong in your vehicle.
In this post, you’ll learn everything about the Service Advancetrac’s meaning, causes, and fixes. So, binge on till the end.
How Does Service Advancetrac Work?
So, the Service Advancetrac is mainly a computerized sensor-based light installed on the Ford dashboard. This light comes on and shows you some codes.
These codes mainly indicate wheel balancing, errors in rotation, speed, and more.
Most Ford vehicles’ wheels, braking systems, and engines have sensors connected with the Advancetrac system. They are mainly connected through electric wires.
Whenever these sensors face issues or imbalances, the Service Advancetrac will be on and show you the codes.
You need to use a modern and most-updated sensor machine to understand the code to get the error in your vehicle. That’s how the Service Advancetrac work.
Why Is Service Advancetrac Light on?
The Service Advancetrac light comes for errors in wheels, braking systems, or engine parts. Even a subtle imbalance in wheel rotation might turn on the Advancetrac light on the dashboard.
However, this safety light may be on for these five reasons (May count hundreds more)
Damaged Wires
As the Advancetrac is connected through electric wires with wheels, brake, and engine, any damaged wire might turn on this light.
For instance, the wires that connect the wheels and sensor may be broken or fails to pass the signal to your dashboard. In that case, you get the Advancetrac light on the dashboard.
Mismatch Wheel
Sometimes, you make the mistake of placing the right wheel on the left side. Maybe you attach the left wheel on the right side; or the front wheel at the back.
That’s called the mismatched wheel. The Advancetrac light will show you some codes if you make a mistake.
When you get such error codes on the dashboard after replacing wheels, you must recheck them.
So, you can solve the mismatch wheel issues and remove those codes from the dashboard screen.
Faulty Rotation Speed
The four wheels of any Ford vehicle may fail to rotate at the same speed, though they are supposed to rotate at the same speed.
In such a case, you get the Advancetrac light on the dashboard screen. It’s not likely that the code will tell you about the rotation speed; these codes notify you that you need to discover something wrong with this vehicle.
Functional Error in Engine
In most cases, the engine errors may turn the Service Advancetrac light on. Suppose you drive a Ford truck or any car with some engine functionality errors that you might miss.
In that case, the Service Advancetrac sensor might show you the light and give you some codes on the dashboard screen.
You can only understand these codes if you use a modern scanner. Other than that, you’ll need to dig out meaning to fix that problem.
Broken Clock Spring
The clock spring is an inevitable part of every vehicle. It connects the steering, wheels, and the entire electric system.
After years, the clock spring may be worn or damaged and fail to move the wheels as the steering. So, you get the Service Advancetrac light on the dashboard with some codes.
How to Solve Service Advancetrac Issues?
You can solve the Service Advancetrac showing problems in five simple steps.
For that, you need a scanner to read the warning light message and follow the following steps.
Decode the Warning Light Message
First, you must decode the warning light message by using a scanner. If you don’t have that tool, you must go to a repair shop and ask them to decode the message and repair the damaged part accordingly.
You should read the message to find the reason if you have the scanner. Then, you must go through the damaged part and repair or connect the wires accordingly.
After that, you should reset the Advancetrac.
Check the Brake Fluid
A lack of brake fluid might turn on the Advancetrac light. That’s why you should check the brake fluid and refill it to a safe level.
It may help you turn off the Advancetrac warning light.
Go Through the Wires
Once the Advancetrac warning light comes on, you should check all the wires. From wheel sensor wires to the engine, check them thoroughly.
Your warning light might be on for any damaged or cut wires. Just connect them and sort out the issues.
Repair the Damaged Clock Spring
After using the steering clock for 5 to 7 years, you must check it after getting the warning light.
Maybe this spring is broken and fails to connect the wheels with your steering. Installing a new clock spring might cost around $700-$800.
Inspect the Engine
Lastly, you should check your engine wires and related parts if the above issues are missing. Be sure your engine works fine and it doesn’t have any faulty parts.
It might help you solve the Service Advancetrac issues.
Service Advancetrac Cost
If your Service Advancetrac warning light is damaged, you need to repair it or replace it with a new one. In such a case, the Service Advancetrac cost might be around $150-$250, depending on labor costs and parts.
People who know how to change the Advancetrac warning light may save a couple of hundred bucks and sort out the problem by $20-$50.
Service Advancetrac Check Brake System
Apart from showing the warning lights, the Service Advancetrac is also connected to the anti-brake system known as the ‘Service Advancetrac Check Brake System.’
This system protects your vehicle from skidding in any panicked situation.
If any one or two wheels are locked under hard-brake, the Advancetrac software helps to break the skid by pulsating brake pressure.
Why Do Service Advancetrac and ABS Light on?
Service Advancetrac and ABS light is on because of the damaged wheel sensor or the failure of the speed sensor. If you ever get these two lights on, you must check the wheel wires, parts, and speed sensor.
There must be some errors that you need to sort out soon. The ABS or Antilock Braking System is there to help you control the braking system automatically under any panicked situation.
But the errors in the wheel sensor may damage the ABS and turn on this light.
How to Reset Service Advancetrac?
You have two ways to reset the Service Advancetrac system. One is with the switch, and the second method is by turning off the engine.
First method
You must have a switch beside the engine to turn off the Service Advancetrac light. You can simply turn it off and reset it within a few seconds. For that, you must have the working Advancetrac switch.
Second Method
If the Advancetrac switch doesn’t work, you should turn off the engine and then turn it on. The Advancetrac will automatically get reset, and the light will be turned off.
Frequently Asked Questions
Can I drive with the advanced track warning light on?
You can drive with the warning light, although it’s better to identify the reasons and sort them out. Otherwise, you may face challenges in driving. However, the Advancetrac warning light won’t hamper your regular driving.
How should I decode the warning light message/code?
You should use a modern or updated sensor that can read Ford’s Advancetrac System. Otherwise, you need to go to a mechanic to assist you in decoding and solving the problem.
Does service advance track have any abs system?
Yes, this Computerized system has the ABS (anti-braking system). It helps to prevent your vehicle from skidding. But the damaged wheel & speed sensor may turn on the Service Advancetrac & ABS light.
What’s the best way to reset the advanced track warning light?
You can reset/turn off the warning light by turning off your engine. Though there’s a button to press and do the job, turning off the engine would be the best way.
Closing Words
We’ve discussed the Service Advancetrac meanings, causes, and fixes here. You must be able to follow all the tips and solve the issues accordingly.
Remember to check the wheels and speed sensors to sort out the warning light issues.
Always follow the Advancetrac warning light and solve the issues. And it’s certainly a great idea to have a perfect scanner to read the light warning message.
Leave a Reply