Wipers are supposed to go upwards, but downward wiping is wrong! But why are the wipers going in the wrong way?
They go downwards or in the wrong way due to damaged or misaligned assembly, wrong spindle rotation, and faulty installment. Luckily, the wrong-way wipers can be sorted out by reinstalling the wipers correctly.
Today, we’ll see why the wipers go the wrong way and how quickly you can sort it out. There are three reasons and solutions for wrong-way wipers.
For that, you must go through the entire article and follow the process accordingly.
Why Are the Wipers Going the Wrong Way?
As said before, the wipers are going the wrong way for three reasons: faulty installation, the spindle rotating from the opposite way, or the misaligned wipers.
Let’s get through them in detail!
Wrongly Installed Wipers
When you take off the wipers for cleaning purposes or change them with the new ones, a common mistake everyone makes is placing the right one on the left and the left one on the right!
So, if you turn on the wipers, they will go in the wrong direction or downwards instead of upwards.
Though you can easily identify the position of the wipers if you place them on the surface evenly, you’ll make the same mistake of combining the right-left combination.
As a result, the wipers will go in the downward position instead of going upwards or in the right way.
Opposite Spindle Rotation
Sometimes the spindle may rotate in the opposite direction. It is supposed to rotate in the back-and-forth ways, but the wrongly installed spindle may rotate in the wrong way.
As a result, the wipers will also go downside instead of upside.
Sometimes, the overused wiper spindle may even rotate both ways due to the decayed or damaged machine. This can result in your wipers going in the wrong direction.
Faulty Assemble
Wipers have three parts; the arms (wipers), the spindle/motor, and the blades. They all perform together to give you the best wiping experience.
If any of these goes wrong, the entire assembly must be reinstalled.
Sometimes, the assembly or the placement might be wrong if you don’t have the right position. Maybe the wiper motor is in the wrong position or fails to rotate correctly.
As a result, you get the wrong way of wiping.
How to Fix Wipers that Go Wrong Way?
Fixing wipers that go the wrong way is much easier than finding out the reasons why they wipe in the opposite direction.
Here, you can follow some easy and simple steps to make them wipe in the right way.
Step 1 − Remove the Wipers
If your wipers go wrong, you should remove them first. It helps to find out the reason why it happens.
If you find installment errors in the wipers, you should sort them out and reinstall them.
What if the wipers are in the right place?
In such conditions, something must be wrong with the spindle box or the motor. For that, you must remove the wipers from the windshield and follow the following steps below, addressed in step 2.
Step 2 − Fix the Spindle/Change It
Since the wipers are at the right angle, you should check the spindle box and the rotation. Sometimes, the spindle rotation is opposite for wrong installation or internal damage.
If the spindle goes downside, the wipers will follow the same and go the wrong way. Therefore, the spindle should be replaced or repaired accordingly.
Either you repair it and solve the rotation problems. It’ll surely fix the wiping problems thoroughly.
But things might get worse if you have the wrong assembly line, you should follow the next step to get the perfect assemble or wiper motor.
Step 3 − Change the Assemble/Motor
Once your spindle and the motor get damaged and old, it’s better to replace the entire assembly line and install the new one.
Here, the main barrier is the replacement cost. You can follow the tips to get an old assembly and install the entire one here.
It’ll be the easiest and most budget-friendly solution.
A new or used assembly line comes with the perfect package where you get the wipers, motor, and spindle box.
Once you install the new one, it will surely solve the wiping issues.
Step 4 − Install the Wipers and Test
Once you follow the above steps, it’s time to reinstall the detached wipers. Make sure to install the wipers from the opposite side.
Otherwise, the problem will start again, and you can’t do anything about it.
For a safe installation, you must place the wipers on the surface to see if they are in the right place. And only when you’re sure they’re in the right way, install the wipers!
Tips to Fix Wipers Position and Other Issues
If you ever find your wipers are going wrong, you should follow some tips to solve the problem immediately.
Check Wipers Position
Watch out for the wipers and figure out their position. If you find any misalignment or installation errors, fix them. It’s better to remove the wipers and install them again.
Repair The Damaged Wires
Check the electric wires that connect the wiping motors to the engine. Sometimes, the wires might be disconnected or damaged and fail to move the wipers. If you find any damaged/disconnected wires, replace them with a new ones. Or connect them to the engine.
Fix The Wiping Motor
If you find a damaged wiping motor, try replacing it with a new one instead of repairing the existing one. Often, the repairing engine may need to perform better. As a result, the repair cost will be in vain
Clean Wipers Regularly
Regular cleaning is necessary for getting a smooth wiping service from the wipers. Keep the dust and snowfall from getting stuck between the wipers.
Frequently Asked Questions
Why do the wipers go wrong?
The wipers may go wrong if there is too much dust. Otherwise, the blown-by electric wires might hinder the wipers’ job. The broken controls and damaged spindle/motor may also damage the wipers and stop them from wiping the windshield.
How to stop wipers from going wrong?
You can remove the wipers and reinstall them correctly to stop them from going wrong. Sometimes, the spindle needs to be repaired, and the rotation should be right. That way, you can stop wipers from going wrong.
What to do if my wipers are stuck in the middle?
If your wipers are stuck in the middle of the windshield, you should remove everything from the windshield. Then, use a hammer & a screwdriver to replace the tab into the position. As a result, the transmission system will catch the wipers again. Thus, you can fix the wipers if they get stuck in the middle or upright position.
How to reset my wipers?
You can reset your wipers by removing the cover from the windshield & wipers. Then, go through the blades and check their position. Remove the blades and reattach them to the motors. It should reset your wipers again.
Closing Words
Your wipers are going the wrong way because of improper installation, opposite spindle rotation, and faulty assembly. These are the most common reasons.
However, you can solve the issues by reinstalling the wipers or sorting out the spindle rotation problem.
If you follow all the tips and steps and still get the wrong way of wiping, you should replace the entire wiping system. Change the motor, blades, and wipers. Before that, remember to follow the above solutions.
Leave a Reply